2023
- Numerical Investigation of the Influence of the Degree of Reaction in an Axial Compressor Stage With Tandem Vanes. TUM Lehrstuhl für Turbomaschinen und Flugantriebe, 2023, mehr…
- Numerical Investigation of the Influence of the Degree of Reaction in an Axial Compressor Stage With Tandem Vanes. TUM Lehrstuhl für Turbomaschinen und Flugantriebe, 2023, mehr…
- Experimental investigation of performance and soot emissions of oxygenated fuel blends in a small aero engine. TUM Lehrstuhl für Turbomaschinen und Flugantriebe, 2023, mehr…
- Detailed Gaseous and Particulate Emissions of an Allison 250-C20B Turboshaft Engine. Journal of Engineering for Gas Turbines and Power., 2023 mehr…
- Challenges in the Application of Hot-Wire Anemometry for the Investigation of Transient Temperature Fluctuations in a High-Speed Research Compressor. ASME Turbo Expo, American Society of Mechanical Engineers, 2023 mehr…
- Design of a small pressure chamber to evaluate probe calibrations at varying Reynolds numbers. Journal of Physics: Conference Series 2511 (1), 2023, 012023 mehr…
2022
- Numerical Investigation of Near-Tip Modifications for a Highly Loaded Low-Speed Rotor Under the Influence of Double Leakage. Journal of Turbomachinery, 2022 mehr…
- Platform Leakage and Blade Tilting in Axial Compressor CFD-Simulations. 25th Conference of the International Society for Air Breathing Engines, 2022 mehr…
- Numerical Analysis of Blade Platform Leakage in Axial Compressors. ASME Turbo Expo 2022 Turbomachinery Technical Conference and Exposition, 2022 mehr…
- Analysis of Cavity Leakage Effects on Coupled Non-Axisymmetric Endwall-Arifoil Optimization in a Low-Speed Compressor Tandem Stator. ASME, 2022 mehr…
- Robust Optimization Used in the Redesign of a Low-Speed Compressor Tandem Stator. ISABE 2022, 25th ISABE Conference, 2022 mehr…
- Numerical Calibration and Investigation of the Influence of Reynolds Number on Measurements With Five-Hole Probes in Compressible Flows. Journal of Turbomachinery 144 (9), 2022 mehr…
- Design of a Small Pressure Chamber to Evaluate Probe Calibrations at Varying Reynolds Numbers. XXVI Biennial Symposium on Measuring Techniques in Turbomachinery, 2022 mehr…
2021
- Numerical Investigation of the Aerodynamic Performance of Hybrid Aerofoils in a 1.5-Stage Low-Speed Compressor. Volume 2A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics, American Society of Mechanical Engineers, 2021 mehr…
- Numerical Investigation of the Aerodynamic Performance of Hybrid Aerofoils in a 1.5-Stage Low-Speed Compressor. ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition, 2021 mehr…
- Blade design and tip clearance flow analysis for a compact high-pressure compressor rear stage. 14th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, European Turbomachinery Society, 2021 mehr…
- Numerical Calibration and Investigation of the Influence of Reynolds Number on Measurements With Five-Hole Probes in Compressible Flows. ASME Turbo Expo, 2021 mehr…
2020
- Numerical Investigation of Compressor Tandem Aerofoils Featuring Near-Endwall Modification. 18th Symposium on Transport Phenomena and Dynamics of Rotating Machinery ISROMAC, 2020 mehr…
- Helicpoter Engine Performance Simulations Accounting for Intake Distortion. Deutscher Luft- und Raumfahrtkongress DLRK, 2020 mehr…
- Design of a rear-stage subsonic axial compressor with casing treatments. CEAS Aeronautical Journal (ISSN 1869-5582), 2020 mehr…
- Experimental Investigation of the Starting Provedure of a Helicopter Gas Turbine Featuring an Impingment Quick-start System. ASME Turbo Expo 2020, 2020 mehr…
- Reduced-Order Modelling of Rotating Stall. ASME International Gas Turbine & Aero Engine Technical Congress, 2020 mehr…
- Potential of Surrogate Modeling in Compressor Casing Design Focusing Rapid Tip Clearance Assessments. 65th ASME International Gas Turbine & Aero Engine Technical Congress, 2020 mehr…
- Multi-Objective Optimization and System Evaluation of Recuperated Helicopter Turboshaft Engines. Journal of Energy, 2020 mehr…
2019
- Interacting Flow Effects in the Stages of a Low-Speed Multistage Axial Compressor Using Shrouded and Cantilevered Stators. 55th AIAA/SAE/ASEE Joint Propulsion Conference, 2019 mehr…
- Preliminary Design of a Three-Stage Low-Speed Research Compressor Using Tandem Vanes. 55th AIAA/SAE/ASEE Joint Propulsion Conference, 2019 mehr…
- New Methods for Secondary Flow Phenomena Visualization and Analysis. ASME Turbo Expo, 2019 mehr…
- Development and Commissioning of a High-Speed Research Compressor Facility. 55th AIAA/SAE/ASEE Joint Propulsion Conference, 2019 mehr…
- Reducing compressor shroud leakage flow bai raising the stator hub line: low speed tests. ASME Turbo Expo, 2019 mehr…
- Structural Analysis of an Auxetic Casing Structure Incorporating Tip Blowing Casing Treatment Modification. ASME Turbo Expo, 2019 mehr…
- Quantification of the Effect of Circumferential Repeated 3D Features on Radial Displacement of a Compressor Casing Focusing Model Simplification: Part I. 8th International Conference on Mechanics and Industrial Engineering, 2019Paper No. ICMIE 122 mehr…
- The potential of helicopter turboshaft engines incorporating highly effective recuperators under various flight conditions. Aerospace Science and Technology 88, 2019, 84-94 mehr…
- High temperature heat exchangers for recuperated rotorcraft powerplants. Applied Thermal Engineering 154 (25), 2019, 548-561 mehr…
- Optimization design analysis of primary surface recuperator for rotorcraft powerplant applications. ASME Turbo Expo, 2019 mehr…
- Pressure-sensitive paint measurements in narrow clearances - a feasibility study. ASME Turbo Expo, 2019 mehr…
2018
2017
- Using Annulus Contouring to Compensate Compressor Mis-Matching Effects in the Presence of Casing Treatments. 23rd International Symposium on Air Breathing Engines, 2017 mehr…
- Experimental Investigation of an Engine Quick-Start System with Compact Air Supply for Rotorcraft Application. 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2017 mehr…
- Operational Aspects of an Engine Quick-Start System with Compact Air Supply for Rotorcraft Application. Deutscher Luft- und Raumfahrtkongress, 2017 mehr…
- Improved flammability for hydrogen fuelled scramjets with preinjection catalytic radical farming. 23rd International Symposium on Air Breathing Engines, 2017 mehr…
- Analysis of an Auxetic Casing Structure for Tip Clearance Control under Various Temperature and Pressure Conditions. 23rd International Symposium on Air Breathing Engines, 2017 mehr…
- Design of a static test rig for advanced seals and air bearing testing. 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 2017 mehr…
2016
- Fatigue Analysis of a Cylindrical Turbine Disk with Integrated Heat Pipes. 52nd AIAA/SAE/ASEE Joint Propulsion Conference, 2016 mehr…
- Design of an Airworthy Turboshaft Engine Quick-Start System with Compact Pressurized Air Supply for Rotorcraft Application. 42nd European Rotorcraft Forum, 2016 mehr…
- Design Parameter Identification of the Air Supply for a Turboshaft Engine Quick-Start System. 52nd AIAA/SAE/ASEE Joint Propulsion Conference, 2016AIAA-2016-5062 mehr…
2015
2014
2010
- Numerical Investigation of Unsteady Flow Phenomena in an HP Axial Flow Compressor Incorporating Stator Shroud Cavities. 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2010 mehr…
2000
- Using sweep and dihedral to control three-dimensional flow in transonic stators of axial compressors. ASME Turbo Expo, 2000 mehr…